MTX RFL5300 picture

RFL5300

Flagship class-AB 800W RMS 5-channel Hi-Fi amplifier with ultra-complete variable active x-over

Introduction

The MTX RFL5300 5-channel amplifier is a daydream. With only one amp, and all that implies in terms of size and ease of assembly, it is possible to make a very high-end installation complete with state-of-the-art filtering. The build quality and the quality of the components used make this an exceptional amp. It's a slightly deflated RFL4120 but with a class-AB sub channel that hits. Hi-fi Sanken transistors, three separate power supplies, racing capacitors, we spent lavishly...

Features

• Exceptional sound quality thanks to class-AB topology.
• High quality components (Sanken hi-fi grade transistors).
• All aluminum construction with backlit window to admire the components.
• Triple power supply converter (One per amp) to better manage current and power.
• A whole installation in a single amplifier: simplicity and efficiency (3 amps + an active filter).
• Flexibility of the active filter capable of doing everything (3 active channels or front-rear-sub).
• EBC remote level control included.
• Ø50mm2 power terminal block

Specifications

• 5-channel Class-AB amplifier
• CEA2006 certified power:
- 4 channels: 4x120W RMS @ 2Ω THD + N ≤1%
- 4 channels: 4x80W RMS @ 4Ω THD + N ≤1%
- 4 channels: 2x240W RMS @ 4Ω THD + N ≤1%
- Mono channel: 1x370W RMS @ 2Ω THD + N ≤1%
- Mono channel: 1x250W RMS @ 4Ω THD + N ≤1%
• Active filter channels 1 and 2: High Pass (HPF) 12dB / oct variable from 40Hz to 5KHz
• Active filter channels 3 and 4:
- High pass (HPF) 12dB / oct variable from 40Hz to 800Hz
- Low pass (LPF) 12dB / oct variable from 40Hz to 5000Hz
- Band pass (PBF) is the sum of the LPF and HPF
• Active filter channel 5:
- Low pass (LPF) 24dB / oct variable from 40Hz to 800Hz
• Signal / noise ratio (1 Watt):> 98dB
• THD + Noise (Distortion) (1 Watt): ≤ 0.05%
• Frequency response (± 1dB): 10Hz-90000Hz
• Sensitivity level: 200mV to 6V
• EBC control included
• Dimensions: 626mm x 204mm x 59mm

Recommended performance associations

TX6 TX8 Speakers - TX612 TX615 Subwoofers

Image

Recommended effective combinations:
• In five active channels (tweeters + midrange + sub) with TX8, TX6 speakers and TX612 TX615 subwoofer
• In five active channels (2-way + bass + sub kit)
• Recommended power pack: MTX StreetWires ZNX50K

Image
Image
Image

Restrictions

The power of the amplifier must not exceed that of the loudspeaker. We must compare RMS powers with RMS powers. The amplifiers should not be exposed to moisture, excessive vibration, or high temperatures.

Warning

MTX wants you to enjoy your hearing for a long time. Excessive exposure to loud volumes can damage your hearing. The United States Department of Labor recommends not exceeding the following recommendations:
90db : maximum 8 hours / day
92dB : maximum 6 hours / day
95db : maximum 4 hours / day
97db : maximum 3 hours / day
100db : maximum 2 hours / day
102db : maximum 90 minutes / day
105db : maximum 60 minutes / day
110db : maximum 30 minutes / day
115db : maximum less than 15 minutes / day
120db : immediate danger, 0 minutes / day

Picture Gallery

Downloads

In the press...

Car&Hifi (D)

"The RFL5300 is very well built and extremely strong"
"There is enough power to have fun, and also a lot of sound quality for audiophiles"
"The RFL5300 is generously endowed both outside and inside"
"A lot of power with a lot of quality"
"The RFL5300 comes with everything you need"
"The RFL5300 Delivers High, Rich Analog Performances"
"There are big, powerful bass, reaching your ears in a well-controlled manner"
"The midrange and the highs are thick and are surprisingly rich and sensitive"
"Audiophile music plays smoothly with the MTX RFL5300"
"The RFL5300 creates a harmonious and very balanced room"