MTX TX665S picture

TX628T

TX6 28mm 4Ω 90W RMS 620W Peak neodymium tweeters with silk dome and capacitor filters

Introduction

The MTX TX628T are high-end 28mm tweeters. These are the MTX TX665S tweeters elected best speaker of the year. They can handle 90W RMS and 360W peak (that's a lot of power...). They have an impedance of 4 ohms to suit all amplifiers. Its small outer diameter allows them to be installed almost anywhere. Behind the mirrors, on the dashboard or at the top of the doors. To take advantage of it, you have to place the tweeters as high as possible to have the highest possible staging.
Their sound quality is exceptional. It goes very high, smooth, with a lot of detail and energy. Their large dome diameter (28mm) allows for a powerful sound with a lot of impact. The silk dome is the best solution to perfectly spread the sound and therefore reduce the directivity. On both sides of the car, you can hear every tweeter very well. To keep it small and hold the power, we use ultra magnetic neodymium magnets. They therefore remain easy to install. For filtering, two hi-fi grade polypropylene capacitors are provided. It's simple and efficient.

Features

  • Exceptional sound quality. These are the tweeters of the MTX TX665S kit voted best speaker of the year.
  • Luxurious construction with an extra large 28mm voice coil that gives incredible sonic impact and a silk dome for smoothness and directivity (sounds great even if you're not right in front of the tweeter).
  • Ultra strong neodymium magnets to stay small and therefore easier to install and to ensure high power handling.
  • Passive filters included: Hi-FI grade polyprolylene capacitors to never weaken and always stay musical.
  • They are small, and therefore easily housed behind the mirrors or on the dashboard.
  • They boost the sound image impressively when installed behind the mirrors or on the dashboard.

Specifications

  • Two silk dome tweeters
  • Voice coil diameter: 28mm
  • External diameter: 57mm
  • Peak power: 620W 3000 cycles
  • RMS power: 90W
  • Sensitivity: 93.5dB/2.83v/1m
  • Impedance: 4Ω
  • Response: 1500Hz-28000Hz
  • Installation depth: 16.5mm
  • Supplied with two passive filters (capacitors)

Warning

MTX wants you to enjoy your hearing for a long time. Excessive exposure to loud volumes can damage your hearing. The United States Department of Labor recommends not exceeding the following recommendations:

  • 90dB: maximum 8 hours / day
  • 92dB: maximum 6 hours / day
  • 95dB: maximum 4 hours / day
  • 97dB: maximum 3 hours / day
  • 100dB: maximum 2 hours / day
  • 102dB: maximum 90 minutes / day
  • 105dB: maximum 60 minutes / day
  • 110dB: maximum 30 minutes / day
  • 115dB: maximum less than 15 minutes / day
  • 120dB: immediate danger, 0 minutes / day

How to use the TX628T

Recommended amps

Image

  • Compatible amplifiers: RFL4120 RFL5300 TX480D TX2275 TX2450 TR275 TR450
  • Preferably used at the front, behind the mirrors or on the dashboard or at the top of the doors

#1. Installing the TX628T tweeters on your headunit, in parallel with the front speakers to lift up the staging. The use of the two included x-overs (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without filters the tweeters melt and break.

Image

#2. Installing the TX628T tweeters on an amplifier. The use of the two x-overs (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without filters the tweeters melt and break.

Image

#3. Installing the TX628T tweeters in parallel with two speakers (coaxial or separate) on an amplifier. The use of the two x-overs (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without filters the tweeters melt.

Image

Dimensions

Image

Pictures Gallery

Downloads




MTX around the world


MTX - Mitek Europe

23 rue des Apennins 75017 Paris
Tel : +33 1 42 28 72 52 - contact@mtx.audio
© 2022 MTX Mitek Europe