Image

TX1500D

1500Wrms @1Ω mono block class-D amplifier with complete variable x-over and bridge mode

Introduction

The TX1500D is a Class-D mono amplifier designed specifically for subwoofers, delivering over 1500 Wrms at 1Ω. It’s a technological marvel capable of powering 1 to 4 subwoofers with a total power handling capacity of 1500 Wrms. The build quality is superb, featuring top-of-the-line components (Infineon/IRF for greater reliability and performance), and it’s equipped with a comprehensive active x-over and even a connector for controlling and connecting cooling fans...

(+) Product

  • High-efficiency (90%) Class-D amplifier designed specifically for subwoofers
  • Optimized for loads from 1Ω to 4Ω
  • All-aluminum construction
  • EBC remote control included
  • Active x-over 24dB/oct filters, variable from 40 to 150Hz
  • 25Hz subsonic filter, 24dB/oct
  • Thermally regulated connector for external fan
  • 21 mm² power terminals
  • Bridge mode possible with 2 amplifiers
  • Optimal use with: 1x TX812, 2x TX812, 1xTX815, 2x TX815

Specifications

  • Class-D mono block 1-channel amplifier
  • CEA2006 certified power
    • 1x 1500 watts RMS @1Ω and THD + N ≤1%
    • 1x 1000 watts RMS @2Ω and THD + N ≤1%
    • 1x 600 watts RMS @4Ω and THD + N ≤1%
  • Active x-over
    • Low Pass (LPF) 24dB/Oct variable from 40Hz to 150Hz
    • Subsonic 24dB/Oct @30Hz
  • Signal / Noise ratio (1 watt): >75dB
  • THD + Noise (Distortion) (1 watt): ≤0,1%
  • Frequency response (± 0,5dB): 10Hz-150Hz
  • RCA sensitivity level: 100mV to 6V
  • EBC (External Bass Control) included
  • Bridge mode with two TX1500D (cable included). Output power: 3000Wrms
  • Dimensions: 366mm x 133mm x 54mm
  • Power connectors: 21mm²
  • Recommanded power kit: ZNX21K

Restrictions

The amplifier's power should not exceed that of the speaker. Compare RMS power ratings with RMS power ratings. Do not expose amplifiers to moisture, excessive vibration, or high temperatures.

Warning

MTX wants you to enjoy your hearing for a long time. Excessive exposure to loud volumes can damage your hearing. The United States Department of Labor recommends not exceeding the following recommendations.

  • 90db : maximum 8 hours/day
  • 92dB : maximum 6 hours/day
  • 95db : maximum 4 hours/day
  • 97db : maximum 3 hours/day
  • 100db : maximum 2 hours/day
  • 102db : maximum 90 minutes/day
  • 105db : maximum 60 minutes/day
  • 110db : maximum 30 minutes/day
  • 115db : maximum less than 15 minutes/day
  • 120db : immediate danger, 0 minute/day

Optimal subwoofers connections for the TX1500D

#1 • One 1Ω subwoofer connected to a TX1500D. The amplifier operates at 1Ω.
#2 • One 2Ω subwoofer connected to a TX1500D. The amplifier operates at 2Ω. Examples: 1x TX812, 1x TX815.
#3 • One 4Ω subwoofer connected to a TX1500D. The amplifier operates at 4Ω.
#4 • Two 2Ω subwoofers connected in parallel to a TX1500D. The amplifier operates at 1Ω. Examples: 2x TX612, 2x TX615, 2x TX812, 2x TX815.
#5 • Two 4Ω subwoofers connected in parallel to a TX1500D. The amplifier operates at 2Ω.
#6 • Three 4Ω subwoofers connected in parallel to a TX1500D. The amplifier operates at 1.33Ω. Examples: 3x RT10-04, 3x RT12-04, 3x TX212a.
#7 • Four 4Ω subwoofers connected in parallel to a TX1500D. The amplifier operates at 1Ω. Examples: 4x RT10-04, 4x RT12-04, 4x TX212a.
Image
Connecting two TX1500D in bridge mode to power one RFL12 or one RFL15. Each amplifier operates at 1Ω.
Image

Complementary Products

Power pack MTX ZNX21K

RCA cables ZNX1.2 ZNX3.2 ZNX5.2

Picture Gallery

Downloads




MTX around the world


MTX - Mitek Europe

23 rue des Apennins 75017 Paris
Tel : +33 1 42 28 72 52 - contact@mtx.audio
© 2022 MTX Mitek Europe