Image

TX225T

TX2 neodymium tweeters Ø25mm (1") 4Ω 65W RMS 450W Peak with silk dome and passive x-over

Introduction

The MTX TX225T are 25mm 1" tweeters specialized in the reproduction of high frequencies. These are the tweeters of the MTX TX250S and TX265S separate speakers. They handle 65W RMS and 450W Peak. They have an impedance of 4Ω to fit easily with any ampl (external or integrated into a head-unit). The small outer diameter makes them easy to install anywhere. Behind the mirrors, on the dashboard or at the top of the doors. To get the most out of it, you have to place the tweeters as high as possible to have the highest possible soundstage.
Their sound quality is excellent. They reproduce a lot of detail with precision, and add bite to musical reproduction. Their large dome diameter allows a powerful sound with impact. The silk dome is the best solution to perfectly distribute the sound and therefore reduce directivity. From both sides of the car, each tweeter can be heard very well. To keep it small and hold the power handling we use ultra magnetic neodymium magnets. They are therefore easy to install. For filtering, two capacitors are provided. It's simple and efficient.

Features

  • These are the tweeters of the MTX TX250S and TX265S separate speakers sold separately
  • 25mm tweeters (large diameter) for impact and power handling
  • Silk dome for softness and to reduce directivity (sounds good even if you're not right in front)
  • Ultra-strong neodymium magnet for more power handling and to remain small and easy to install
  • Passive x-overs included: two capacitors to filter, protect and always remain musical
  • When installed behind the mirrors or on the dashboard, they boost the staging impressively

Specifications

  • Silk dome tweeter
  • Neodymium magnet
  • Diameter: 25mm (1”)
  • Peak power: 450W (3000 cycles)
  • RMS power: 65W
  • Sensitivity: 91.5dB/2.83v/1m
  • Impedance: 4Ω
  • Response: 1500Hz - 25000Hz
  • Depth: 15.7mm
  • Cut out Ø: 45mm
  • External Ø: 53.5mm
  • X-over: 6dB/Oct (polypropylene capacitor)

Recommended efficient associations

Recommended amps: TX2450 TX2275 TR450 TR275

Image

• Can be use with your original head-unit or with an aftermarket head-unit
• Recommanded amps: MTX TX2450 TR450 TX2275 TR275
• Can be use together with the following coax speakers: MTX TX240C TX250C TX265C TR40C TR50C TR65C
• Can be use together with the following powered enclosures: MTX RTP8 RTT8P RTF10P RTU8P TRP8 TRT8P

Warning

MTX wants you to enjoy your hearing for a long time. Excessive exposure to loud volumes can damage your hearing. The United States Department of Labor recommends not exceeding the following recommendations:

  • 90dB: maximum 8 hours / day
  • 92dB: maximum 6 hours / day
  • 95dB: maximum 4 hours / day
  • 97dB: maximum 3 hours / day
  • 100dB: maximum 2 hours / day
  • 102dB: maximum 90 minutes / day
  • 105dB: maximum 60 minutes / day
  • 110dB: maximum 30 minutes / day
  • 115dB: maximum less than 15 minutes / day
  • 120dB: immediate danger, 0 minutes / day

Diagrams

Image

Connecting the TX225T tweeters on a head-unit, in parallel with the front speakers. The use of two x-overs (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without filters the tweeters burn.

Image

Connecting the TX225T tweeters on an amplifier. The use of two filters (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without x-over the tweeters burn.

Image

Connecting the TX225T tweeters in parallel with two front speakers (coaxial or deparate) on an amplifier. The use of two x-overs (Hi-FI grade polyprolylene capacitors - marked SPIRIT MKP 3.3µF 100V) is essential for musicality and reliability. Without filters the tweeters burn.

Dimensions

Image

Picture Gallery

Downloads